Zyxel NWA220AX-6E Review: An Oddball Wi-Fi 6E AP or a Solid 6GHz Band Upgrade

Zyxel NWA220AX-6E is one of a kind, not necessarily in a good way.

On the one hand, it's an affordable well-performing PoE access point that can work as a standalone unit or part of Zyxel's cloud-based Nebula mesh system—you'd need to register an account and log in with the vendor.

On the other, it's a selectable broadcaster that makes things hard to select by offering you either the popular 5GHz band (Wi-Fi 6) or the novelty 6GHz (Wi-Fi 6E). You read it right; you can't use both simultaneously. It's madness.

For this reason, you should look at the Zyxel NWA220AX-6E as more of a Wi-Fi 6E upgrade device that adds 6GHz to an existing Wi-Fi 6 (or 5) network. And only in that case, it makes sense.

You can use its 2.4GHz band will serve as additional bandwidth for low-end devices.

In a way, and at the current street price of less than $230, the NWA220AX-6E is an excellent PoE-ready alternative to the ARRIS SURFboard W6U for those looking to upgrade to the new 6GHz band.

But if you expect it to be just another Wi-Fi 6E access point, like the Netgear WAX630E, you'll be sorely frustrated. You might even get mad.

Zyxel NWA220AX-6E: Not a typical Wi-Fi 6E broadcaster

Of all the Wi-Fi 6E broadcasters (router and access points) I've worked with, the NWA220AX-6E is the only one that's not fully backward compatible.

The ARRIS SURFbroad W6E, which is another oddball broadcaster, has just a single 6GHz band, so backward compatibility is irrelevant.

You have to use it either as a dual-band Wi-Fi 6 router, just like in the case of the WAX630s, or a Wi-Fi 6E upgrade device. In the latter case, it won't support 5GHz clients at all.

But other than the hardware oddities, the NWA220AX-6E shares the same firmware and, therefore, the settings and features as others in Zyxel's Nebula family.

Nebula is a centralized cloud-based portal for network management. It's similar to the Insight Managed of Netgear or EnGenius Cloud. Generally, this type of service applies to business and enterprise users who want to manage multiple APs in one place.

But the NWA220AX-6E can also work as a standalone access point with a local web user interface which is how I evaluate it in this review.

As a Nebula member, the NWA220AX-6E behaves the same as any others—more in the review of the WAX630s.

That said, let's check out the new AP's hardware specs.

Zyxel NWA220AX-6E: Hardware specifications

Name	Zyxel NWA220AX-6E 802.11ax (Wi-Fi 6E) Dual-Radio PoE Access Point
Model	NWA220AX-6E
6GHz Band (channel with)	4x4 AXE: Up to 4800Mbps (20/40/80/160MHz)
5 GHz Band (channel width)	4x4 AX: Up to 4800Mbps (20/40/80/160MHz)
2.4 GH Band (channel with)	2x2 AX: Up to 600Mbps (20/40MHz)
Wi-Fi Bandwidth	AX5400 (2.4GHz + 5GHz or 6GHz)
Number of SSIDs	8 per radio
Role Supported	Access Point, Reaper, Mesh point (Nebula required)
Roaming Standard	802.11k/v/r
Backward Compatibility	802.11ac/n/g/a/b
Power over Ethernet (PoE)	802.3at (802.3bt compatible)
PoE Power Consumption	Power draw 21W via PoE (injector not included)
DC input	DC input : 12 VDC 2A (adapter not included)
Network Ports	1x 2.5GBASE-T PoE Multi-Gig, 1x Gigabit
Wireless Security Methods	WEP WPA WPA2-PSK WPA3
Authentication	WPA WPA2 WPA3-Enterprise EAP IEEE 802.1X RADIUS authentication
Access Management	L2-isolation MAC filtering Rogue AP detection
Mobile App	Zyxel Nebula
Dimensions (W x D x H)	7.09 x 7.09 x 1.65 in (180 x 180 x 42 mm)
Weight	1.43lbs (650g)
Operating Environment	Temperature: 0°C to 50°C/32°F to 122°F Humidity: 10% to 95% (non-condensing)
Accessories Included	Mount plate Mounting screws
Processor	Qualcomm 4-Core CPU
Release Date	September 2022
US Price (at review)	$225

Not ready out of the box, power-wise

Out of the box, the Zyxel NWA220AX-6E includes accessories for mounting but not powering. There's no power adapter or PoE injector.

While that's upsetting, this is the case for most PoE APs. The idea is that you can use it with an existing PoE switch. And you'll need an 802.3at PoE (PoE+) or higher) switch.

The new AP will power on with 802.11af, but in this case, you can only use its second LAN port to host a client—its Wi-Fi won't work.

If you don't have a switch, you'll need to get a separate power adapter or, better yet, a PoE injector. In this case, the best option is the POE12-30W injector which costs another $50.

Once you've gotten the powering part, the hardware setup portion of the Zyxel NWA220AX-6E is simple and the same as any PoE device via these two common steps:

1. Mount the access point to where you want it to be via the included mounting accessory. Or you can place it on a surface.
2. Connect its PoE port—the 2.5Gbps labeled as Uplink—to an existing network via a PoE switch or an injector.

Mission accomplished. Now it's time to access its interface and configure its Wi-Fi networks.

Standard in setup and management

Like the case of all standard Wi-Fi access points, to set up the NWA220AX-6E, you first need to get to its local user interface via its IP address.

Since the existing router gives out this IP, it can be tricky to figure it out, though not exactly hard, as I mentioned in this primer post on IP addresses.

Once you have the IP address, put it on a local computer's browser, and you'll get to the access point's interface. The Zyxel NWA220AX-6E's default login is admin for the username and 1234 for the password, which you will need to change before continuing.

Like the case of the WAX630S, the Zyxel NWA220AX-6E manages its Wi-Fi settings in a more enterprise class which might require some getting used to for those familiar with home networking devices.

For example, it defines a set of Wi-Fi settings (SSID, security, authentication, etc.) by putting them into objects and profiles. After that, you can apply them to different individual Wi-Fi networks.

But the gist is that you can set up to eight individual SSIDs for the 2.4GHz band and another eight or either the 5GHz or the 6GHz—you can't use these two bands simultaneously. In most cases, a single SSID for each band is enough.

Zyxel NWA220AX-6E: Detail photos

---

---

---

---

Zyxel NWA220AX-6E: Reliable performance, good coverage, decent throughput speeds

I tested a single unit of the Zyxel NWA220AX-6E for over a week in multiple configurations. All of its bands passed my 3-day stress test with no disconnection and delivered good throughput, though not as good as one might expect from a Multi-Gig-ready broadcaster.

Specifically, the 5GHz and 6GHz of the AP sustained below Gigabit or just half of Gig+. But if you have a Gigabit broadband, the Zyxel NWA220AX-6E will work out well.

The chart below shows how the new AP performed compared to other Wi-Fi 6E mesh satellite units.

In terms of coverage, the Zyxel NWA220AX-6E shared the same range as the WAX630s on the 5GHz and 2.4GHz bands, in my experience.

So if you have a 2000 ft2 (186 m2) home, place this AP in the center, and chances are you'll get Wi-Fi everywhere. But, like all cases, your mileage will vary.

On the 6GHz, its range was the same as any other Wi-Fi 6E router or access point I've tested. If there's a line of sight, you can be as far as some 75 feet from it and still get a good signal. However, behind a wall, you'll need to cut the range significantly. That's just the nature of this band.

Conclusion

The Zyxel NWA220AX-6E is either a 6GHz band upgrade for an existing network or a dual-band Wi-Fi 6 access point. Either way, it'll deliver reliable Wi-Fi performance for a relatively large home worthy of its current $225 price tag.

If you treat it as a typical Wi-Fi 6E broadcaster—which generally gives you 2.4GHz, 5GHz, and 6GHz simultaneously—you'll be disappointed.

If you're into Gigabit-class performance or Multi-Gig, also check out these alternatives.